RAD ASMi-54 User Manual download pdf (Page 6)

ASMi-54LRT

SHDSL.bis Modem with Integrated Router

ETHERNET ROUTER/BRIDGE

Interface

10/100BaseT 4-port switch

·

Connectors

4 x RJ-45

IP Addressing & Routing

NAPT (Dynamic)

Static NAT (Bidirectional)

Security

Firewall

Stateful packet inspection

IP VPNs

Tunnels: IPsec

IPsec encryption: AES, DES, 3DES

IPsec tunnel mode: AH and  ESP with

SHA1 and MD-5 hashing

Bridging and VLANs

Bridging or Integrated Routing 

VLAN tagging and untagging

Multiple VLAN IDs per port (bridge mode)

802.1p priority tagging, TOS/COS and

 COS/TOS mapping (bridge mode)

EFM

IEEE 802.3 2BASE-TL (was 802.3ah)

Management

Telnet

Web-based configuration for LAN and

 WLAN settings by end-users(can be

 turned off)

SNMP v1/v3

Upload/download of configuration and

binaries via FTP/TFTP

Global statistics screens (terminal,

 web‐based)

Event and trace buffering alarms

INDICATORS

Front Panel

PWR (green) –

On: power supply is on

Off: power supply is off

TST (yellow) –

On: a test is active

Off: no test is active

ALM (red) –

On: a new alarm is detected in the

alarm buffer

Off: no alarms are present in the alarm

buffer

SHDSL SYNC (green/red) –

Green: the SHDSL line is synchronized

and can pass data

Green flashing: the SHDSL line is in

training process

Red flashing: the SHDSL line is in

PAF/M- pair establishment stage

Red: the SHDSL line is either not

synchronized, or in training process

or in PAF/M-pair establishment

stage

Rear Panel

Ethernet Ports LINK/ACT (per port)

ACT (yellow) –

Flashing: Ethernet traffic on the port

LINK (green) –

On: Ethernet port link is up

Off: No Ethernet link on the port

E1 LOC (red) -

On: Loss of signal or sync loss (in

framed mode only) or unframed AIS is

received on the E1 port

E1 REM (red) -

On: Remote alarm is received on the

E1 port

1 2 3 4 5 6 7 8

ASMi-54LRT 1
Data Sheet 3

Comments to this Manuals

No comments